Lateral Surface Area Calculator 3D
Calculate the lateral surface area (side surfaces excluding top and bottom bases) across all standard 3D solids.
1. Select Measurement
Measurement to Calculate
2. Enter Dimensions
Shape
d₁
d₂
d₃
Please enter valid positive numbers for all required dimensions.
Formula Reference
Cube LSA
LSA = 4s²
Cuboid LSA
LSA = 2h(l + w)
Cylinder CSA/LSA
LSA = 2πrh
Cone LSA
LSA = πrl
Triangular Prism LSA
LSA = (a + b + c) × H
Square Pyramid LSA
LSA = 2as
Calculated Result
Total Surface Area
Calculating...
--
cm²
Calculation Steps
What is Lateral Surface Area Calculator?
Lateral surface area is the area of the side surfaces of a 3D solid, excluding its base or bases. For example, when painting the four walls of a room (excluding the floor and ceiling), you are calculating the lateral surface area of a cuboid.
Formula & Geometric Principles
For a cube: LSA = 4s². For a cuboid: LSA = 2h(l + w). For a cylinder: CSA/LSA = 2πrh. For a cone: LSA = πrl. For any prism: LSA = Base Perimeter × Height.
Manual Calculation: Room Wall Area (Cuboid LSA)
Given: Length l = 5 m, Width w = 4 m, Height h = 3 m
- Identify formula: LSA = 2h(l + w)
- Add length and width: 5 + 4 = 9 m
- Multiply by twice the height: 2 × 3 × 9 = 54 m²
- Result: 54 square meters of wall area
Frequently Asked Questions
Lateral surface area is the area of the side surfaces of a 3D solid, excluding its base or bases.
No. A sphere is a single continuous curved surface without distinct bases or vertical sides, so its surface area is simply 4πr² without a separate lateral designation.
They represent the same concept: LSA (Lateral Surface Area) is typically used for polyhedra with flat sides (like prisms and cubes), whereas CSA (Curved Surface Area) is used for solids with curved sides (like cylinders and cones).